MONOETHANOL AMINE
Showing 1–9 of 13 results
-
CheckSeal™ 11 RTV
Silicone Sealant
Check Seal™ 11 RTV is a one-component silicone sealant that cures to a pliable, low durometer solid. It is formulated for use with water and steam-based services.
-
CheckSeal™ 17 RTV
Silicone Sealant
Check Seal™ 17 RTV is a one-component high temperature silicone sealant that cures to a pliable, low durometer solid. It is formulated for use with water and steam-based services.
-
CheckSeal™ 22 AB
Two-Component Epoxy Sealant
Check Seal™ 22 AB is a two component, catalyzed sealant that cures to a rock hard consistency and delivered in a pre-measured kit for easy application. Both parts are mixed then applied with a high-pressure lubricator. It is used in industrial applications, including sealing flange gaskets, valve stems, drain plugs and couplings. It can also be used in conjunction with clamps and pipewrap applications.
-
CheckSeal™ 22 AB Thin
Two-Component Sealant
Check Seal™ 22 AB is a two component, catalyzed sealant that cures to a rock hard consistency and delivered in a pre-measured kit for easy application. Both parts are mixed then applied with a high-pressure lubricator. It is used in industrial applications, including sealing flange gaskets, valve stems, drain plugs and couplings. It can also be used in conjunction with clamps and pipewrap applications.
-
CheckSeal™ 38P
Non Curing Sealant
Check Seal™ 38P is a sealant compound containing TFE-fluorocarbon particles blended into a synthetic binder. It can be either pre-formed manually or pumped into place with a high pressure (10,000 psi) grease gun. 38P is chemically stable and resistant to most chemicals over a wide pH range. It is a highly versatile and durable self molding sealant used for stuffing boxes and for all types of valves, pumps and mechanical equipment.
-
CheckSeal™ 3B
Non-Curing Sealant
Check Seal™ 3B semi-pliable rubber at temperatures up to 700˚F, and is effective as a primary or secondary sealant. It has been successfully used as a secondary micro-void sealant after initial sealant becomes cracked and worm holed.
-
CheckSeal™ 45P
Non-Curing Sealant
Check Seal™ 45Pis a sealant designed for wet or dry chlorine service. 45P is a highly versatile and durable self molding packing used for stuffing boxes and for all types of valves, pumps and mechanical equipment.
-
CheckSeal™ 4AB
Two-Component Sealant
Check Seal™ 4AB is a two-component sealant that cures to a relatively hard, but flexible solid. The most common usage of Check Seal™ 4AB is in repairing water, steam leaks to temperatures as high as 650˚F. It can be used with acids, alkalis, hydrocarbons, ammonia and BFW.
-
CheckSeal™ 9B
Thermosetting Sealant
Check Seal™ 9B is a is a thermosetting resin reinforced with a fibrous bulk. This sealant works great with boiler-feed water and hot condensate leaks. Temperatures to 800˚F.