Chemola™ Desco
If you’re looking for a Desco Distributor and you’re also searching for a company that can deliver quickly and effectively, we hope you’ll contact us here at South Coast Products (SOCO). We’re based out of Texas, but we have a worldwide distribution network with locations on every continent. We can get the products to you promptly, and in excellent condition, no matter where you are or how large your order is. We are specifically set up to meet our customers’ needs, and you can trust us to go above and beyond for you.
Showing 1–12 of 61 results
-
Chemola™ Desco TFE-Seal 110X
For Hard to Seal Valves
Chemola™ Desco TFE-Seal 110X is a premium sealant for worn, damaged and leaking valves. TFE-Seal 110X is formulated with 100% synthetic base fluid for excellent resistance to washout from hydrocarbons. It contains chemically inert PTFE for ultimate sealing capability. Higher PTFE grades are available.
-
Chemola™ Desco Frac-Seal
Water Resistant EP Grease
Chemola™ Desco Frac-Seal is an enhanced-lubricity calcium sulfonate grease with excellent water resistance, pumpability and metal adhesion. It is very stable, resistant to oxidation and high temperatures. Among other applications, it is formulated for use where exposure to harsh elements is a major consideration.
-
Chemola™ Desco CP750 SAGD
Steam-Resistant Lubricant/Sealant
Chemola™ Desco CP750 SAGD is a premium, water insoluble synthetic valve lubricant formulated for extreme high temperature environments such as SAGD, steam injection and geothermal applications. Extensive laboratory and field testing confirms that Chemola Desco CP750 SAGD withstands the temperatures and conditions of steam-assisted gravity drainage, allowing valves to maintain a positive seal during operations. Withstands the maximum pressure rating of the valve.
-
Chemola™ Desco Valve Flush NSR
For Corroded and Frozen Valves
Chemola™ Desco Valve Flush NSR is a butyl flush formulated to free up and clean difficult-to-operate lubricated valves. Cuts residual gums, lacquer deposits, inert solids and corrosion deposits that make valves hard or impossible to operate.
-
Chemola™ Desco Valve Cut
Frees Corroded and Frozen Valves
Chemola™ Desco Valve Cut is a formulated multi-ingredient, semi-fluid combination of penetrants and lubricants designed to dissolve and cut residual gums, laquer deposits, inert solids and corrosion deposits that make valves non-functioning and hard to operate.
Although not all valves are recoverable with Valve Cut, with periodic use many operators have found that valves remain operable through years of usage under severe conditions with.
-
Chemola™ Desco TFE-Seal 108
For Hard to Seal Valves
Chemola™ Desco TFE-Seal 108 is the ultimate sealant for damaged valves. It was developed and tested by a group of valve repair specialists with over 20 years combined experience. This is the ultimate sealant of internally worn or damaged valves. It contains a 100% synthetic base fluid for excellent resistance to washout from hydrocarbons. If TFE-Seal 108 won’t seal your valve, it will need to be taken offline or rebuilt.
-
Chemola™ Desco TFE-Seal 104
Hydrocarbon Service (Contains PTFE) Sealant
Chemola™ Desco TFE-Seal 104 is a synthetic lubricant/sealant formulated for general hydrocarbon service. It contains fine PTFE flakes suspended in a hydrocarbon resistant base. TFE-Seal 104 is used for sealing valves with moderate seal wear, and is also suitable for use on threads, gaskets, stuffing boxes and valve stems.
-
Chemola™ Desco Polymel 422
Enhanced Hydrocarbon Service
Chemola™ Desco Polymel 422 now has enhanced hydrocarbon resistance with a specially formulated polymeric lubricant base and unique combination of solid additives. Polymel 422 offers superior metal adhesion under the most demanding conditions, temperatures and pressures. This new formulation has advanced corrosion inhibitors for increased resistance to oxidation. Because it is resistant to acids and alkalis it will not wash out during pipeline maintenance. Polymel 422 can be used as a coating on metal surfaces to protect from acidic environments.
Chemola™ Desco Polymel 422, with its wide temperature range, superior adhesion and chemical resistance covers the widest range of applications. It performs excellently with gate, plug and ball valves throughout oil and gas production operations, pipelines and petrochemical plants.
-
Chemola™ Desco Polymel 410
Catalytic Alkylation Service
Chemola™ Desco Polymel 410 is an improved formulation for hydrocarbon resistance. It is formulated with a polymeric lubricant base to enhance high and low temperature performance and hydrocarbon resistance along with resistance to strong acids and bases. Performance is improved in the fringe temperature applications.
-
Chemola™ Desco 1055
Premium Synthetic Valve Lubricant
Chemola™ Desco 1055 is a state-of-the-art synthetic lubricant that is exceedingly resistant to hydrocarbons, water and hydrochloric acid. Chemola™ Desco 1055 is formulated with solid lubricants to provide lubrication to 600˚F.
-
Chemola™ Desco 990-GT
Geothermal Lubricant
Chemola™ Desco 990-GT is a water insoluble synthetic valve lubricant and anti-seize for use in extreme high temperature environments such as geothermal applications. It is highly resistant to water and aqueous solutions (alkalis, acids). The solid lubricant additives contained in Chemola™ Desco 990-GT allow a greater degree of lubrication at temperatures where most lubricants fail.
-
Chemola™ Desco 960
Body Fill
Chemola™ Desco 960 is formulated for valves that contain body cavities. It is an economical body fill that will displace water and other containments. Chemola™ Desco 960 has high metal adhesion to lubricate and seal gates as they enter the body cavity.
Why You Should Choose Our Desco Sealants
Other than our network and excellent delivery times, there are plenty of reasons to choose SOCO. First and foremost, we make premium Desco valve lubricants designed for extreme situations. These thrive under high pressure, in extreme temperatures — high or low temperatures — and when equipment is used around the clock. There are plenty of average options out there, but they’re simply not going to cut it when you need them the most. Ours will. We stake our name on it.
Additionally, we have more than 50 years of experience in this industry. Our founder started the company in 1968 on ingenuity and dedication to developing the best possible products. That continues to be our mission today, and it’s a testament to the quality of our Desco sealants that our customers have continued to choose us for five decades. Additional qualities that set us apart from the competition include:
- We do extensive testing in rigorous conditions.
- We have many eco-friendly options as we seek to both provide premium products and protect the planet.
- Our highly-trained team has all of the knowledge needed to quickly answer any question you may have.
- Our wide variety of products means it’s easy to find something that works perfectly in your specific application.
- We work with a range of industries, such as drilling, oil and gas, pipelines and petrochemical.
- We were founded on the idea that the customer always comes first, and we adhere to that principle today.
In short, we have the best products, but we also have an elite team that makes this process go smoothly and efficiently, putting you first every step of the way. It’s about more than the products. It’s about the experience. Working with us is a game-changer on many levels.
When all is said and done, you also know that choosing us as your Desco distributor means that you can trust your products. Lubricants keep equipment working at maximum capacity in dirty, hot, cold, high-stress environments. Sealants prevent leaks even when the pressure is high and the toll on the system is enormous. You do not want to take any chances in these situations. You need to know that you can utterly and completely trust the products that you buy. When you partner with us, that’s what you get with every single product.
Call Today to Learn More
Would you like to learn more about Desco packing and related products, or are you ready to find out how to place an order? Please do not hesitate to call our friendly sales team at (713) 225-0048 (local) or toll-free at (800) 535-5823.