Chemola™ Desco 1055 is a state-of-the-art synthetic lubricant that is exceedingly resistant to hydrocarbons, water and hydrochloric acid. Chemola™ Desco 1055 is formulated with solid lubricants to provide lubrication to 600˚F.
Chemola™ Desco 111 (HS) is a synthetic lubricant for valves, swivel joints, pumps and flanges in service where sour gases are present. Chemola™ Desco 111 (HS) has high metal adhesion, corrosion resistance and is water resistant.
*For Use In Gate, Ball, And Plug Valves.
Chemola™ Desco 111 (HT) is a black, tacky grease designed for maximum hydrocarbon resistance at temperatures up to 350°F. Chemola™ Desco 111 (HT) is also highly resistant to H2S and sour crude service.
*For Use In Gate, Ball, And Plug Valves.
Chemola™ Desco 50 Pure is a synthetic lubricant used where incidental food contact could occur. It is formulated with ingredients approved by the FDA. It is USDA accepted under the meat and poultry inspection program, and is rated H-1.
Chemola™ Desco 600 is a superior lubricant formulated for resistance to hydrocarbons. It contains 100% synthetic fluids with a non-soap thickener. Chemola™ Desco 600 is our most popular lubricant for non-sour services and is formulated for resistance to hydrocarbons, water and synthetic fluids.
Chemola™ Desco 660 is a superior gate valve lubricant/sealant formulated with 100% synthetic oils and non-soap thickeners. It is very effective in gas service (except chlorine, bromine, fluorine, and oxygen) and highly resistant to washout. It has excellent metal adhesion, corrosion resistance, EP characteristics and is water resistant.
Chemola™ Desco 750 is formulated with 100% synthetic oils and contains solid lubricants for effective lubrication at temperatures to 900˚F.
Chemola™ Desco 800 is a high purity synthetic lubricant formulated for enhanced resistance to aromatic hydrocarbons and gasoline. Its blend of heavy bodied synthetic oils promotes superior metal adhesion and resistance to hydrocarbon blends that have a high percentage of aromatic compounds.
Chemola™ Desco 955 is a hydrocarbon-resistant synthetic lubricant containing molybdenum disulfide for added extreme pressure properties. Chemola™ Desco 955 is formulated with solid lubricants to provide lubrication to 600˚F.
Chemola™ Desco Blue Extreme is a premium industrial grease for use in applications where temperatures fluctuate and excellent water resistance is required.
Chemola™ Desco Clean & Green biodegradable rig wash is a non-phosphate, solvent-free, readily biodegradable, non-toxic cleaner concentrate that is more powerful against oil and grease than its heavy-duty butyl predecessors. This environmentally-friendly cleaner has special biodegradable surfactants coupled with non-toxic sequestrants and dispersing agents that give superior wetting and cleaning power without harming metal surfaces or irritating skin.
Chemola™ Desco MPG formulation includes PTFE to provide the ultimate in thin film lubrication. Heat, friction and drag are reduced, protecting machinery and requiring less frequent lubrication, which helps lower maintenance cost. Its consistency is maintained even under severe operating conditions.
Chemola™ Desco Ram Lube was designed as a lubricant for use on the rims and seals of BOP units. It is non-toxic and environmentally safe.
Chemola™ Desco Super-Q-Sol makes a solution that will penetrate and remove all types of grease and grime normally encountered in industrial and commercial cleaning jobs. It is formulated for steam cleaners and power washers, but equally effective when applied by rag, brush or spray. Chemola™ Desco Super-Q-Sol will not clog jets or lines in power equipment.
Chemola™ Desco Super-Q-Sol concentrate is a complex, biodegradable liquid detergent that is most effective with high dilution ratios of water. A normal dilution ratio of 1 to 50 parts water is recommended but the ratio will vary from 1 to 20 parts water up to 100 parts water, according to water properties and cleaning conditions. The cleaning solution is non-flammable and can be used in hazardous plant areas.
Chemola™ ThredOn™ 335 T&C Klean Kote was developed as a metal-free alternative to API Modified. T&C Klean Kote exceeds all performance specifications described in API specification 5CT and set forth in API Recommended Practice 5A3.
Chemola™ ThredOn™ 365 Millennium is an excellent, metal-free substitute for API modified high-pressure thread compound. Millennium is formulated without metallic components (lead, zinc, copper). This TFE compound is environmentally safe and provides an excellent seal on casing, tubing and line pipe threads.
Millennium conforms to the performance requirements of API 5A3.
ThredOn™ Enviro-Lube is a technologically advanced, biodegradable grease used in auto-lubrication jackup systems, windmill installation and service vessels and jackup rigs. The environmentally-friendly lubricant contains no solids or particles, provides excellent corrosion protection and adheres to wet surfaces over a wide temperature range.
Major manufactures of auto-lubrication systems have extensively tested Enviro-Lube. They have both approved and recommended the product based on its pumpability, sprayability, extreme pressure capability and adhesive quality over a wide temperature range. Very few companies receive this approval and Enviro-Lube is the first recipient that is Y1 certified.