CHLORINATED HYDROCARBONS
Showing all 9 results
-
CheckSeal™ 11 RTV
Silicone Sealant
Check Seal™ 11 RTV is a one-component silicone sealant that cures to a pliable, low durometer solid. It is formulated for use with water and steam-based services.
-
CheckSeal™ 17 RTV
Silicone Sealant
Check Seal™ 17 RTV is a one-component high temperature silicone sealant that cures to a pliable, low durometer solid. It is formulated for use with water and steam-based services.
-
CheckSeal™ 357P
Non-Curing Sealant
Check Seal™ 357Pis a non-curing sealant that contains a blend of non-asbestos fibers in synthetic oils. It works great on valve packing and wire wrap fugitive emission repairs, and is specifically designed for high temperature hydrocarbon service up to 750°F.
-
CheckSeal™ 38P
Non Curing Sealant
Check Seal™ 38P is a sealant compound containing TFE-fluorocarbon particles blended into a synthetic binder. It can be either pre-formed manually or pumped into place with a high pressure (10,000 psi) grease gun. 38P is chemically stable and resistant to most chemicals over a wide pH range. It is a highly versatile and durable self molding sealant used for stuffing boxes and for all types of valves, pumps and mechanical equipment.
-
CheckSeal™ 3B
Non-Curing Sealant
Check Seal™ 3B semi-pliable rubber at temperatures up to 700˚F, and is effective as a primary or secondary sealant. It has been successfully used as a secondary micro-void sealant after initial sealant becomes cracked and worm holed.
-
CheckSeal™ 45P
Non-Curing Sealant
Check Seal™ 45Pis a sealant designed for wet or dry chlorine service. 45P is a highly versatile and durable self molding packing used for stuffing boxes and for all types of valves, pumps and mechanical equipment.
-
CheckSeal™ 4AB
Two-Component Sealant
Check Seal™ 4AB is a two-component sealant that cures to a relatively hard, but flexible solid. The most common usage of Check Seal™ 4AB is in repairing water, steam leaks to temperatures as high as 650˚F. It can be used with acids, alkalis, hydrocarbons, ammonia and BFW.
-
CheckSeal™ HTS
Non-Curing Sealant
Check Seal™ HTS is a heavily fibrous sealant designed for use at temperatures up to 700˚F. HTS works great for a wide variety of leaks with its fibrous characteristics, such as leaking valve seats, this sealing is accomplished without affecting valve operation. Other uses include steam valve packings, steam union leaks, steam wire wraps and steam valve bonnets.
-
CheckSeal™ RPG
Non-Curing Sealant
Check Seal™ RPG is a black, fibrous, graphite based sealant. Durable and designed for extreme temperatures and pressures. Specifically designed for high temperature service on valves, flanges, and enclosures.