RED OIL (COM. GRADE)

Showing 1–9 of 19 results

CheckSeal™ 11 RTV

Silicone Sealant

Check Seal™ 11 RTV is a one-component silicone sealant that cures to a pliable, low durometer solid. It is formulated for use with water and steam-based services.
CheckSeal™ 17 RTV

Silicone Sealant

Check Seal™ 17 RTV is a one-component high temperature silicone sealant that cures to a pliable, low durometer solid. It is formulated for use with water and steam-based services.
CheckSeal™ 20 AB

Dielectric Two- Component Sealant

Check Seal™ 20 AB is a two-component, rubber type sealant developed for the electrical utility industry and commonly used for transformer leaks. It is available in both fast and slow cure formulas delivered in a two part, pre-measured kit for easy application. Both parts are mixed then applied with a high-pressure lubricator. Check Seal™ 20 can be used for sealing flange gaskets, valve stems, drain plugs and couplings. It can also be used in conjunction with clamps.
CheckSeal™ 22 AB

Two-Component Epoxy Sealant

Check Seal™ 22 AB is a two component, catalyzed sealant that cures to a rock hard consistency and delivered in a pre-measured kit for easy application. Both parts are mixed then applied with a high-pressure lubricator. It is used in industrial applications, including sealing flange gaskets, valve stems, drain plugs and couplings. It can also be used in conjunction with clamps and pipewrap applications.
CheckSeal™ 22 AB Thin

Two-Component Sealant

Check Seal™ 22 AB is a two component, catalyzed sealant that cures to a rock hard consistency and delivered in a pre-measured kit for easy application. Both parts are mixed then applied with a high-pressure lubricator. It is used in industrial applications, including sealing flange gaskets, valve stems, drain plugs and couplings. It can also be used in conjunction with clamps and pipewrap applications.
CheckSeal™ 357P

Non-Curing Sealant

Check Seal™ 357Pis a non-curing sealant that contains a blend of non-asbestos fibers in synthetic oils. It works great on valve packing and wire wrap fugitive emission repairs, and is specifically designed for high temperature hydrocarbon service up to 750°F.
CheckSeal™ 38P

Non Curing Sealant

Check Seal™ 38P is a sealant compound containing TFE-fluorocarbon particles blended into a synthetic binder. It can be either pre-formed manually or pumped into place with a high pressure (10,000 psi) grease gun. 38P is chemically stable and resistant to most chemicals over a wide pH range. It is a highly versatile and durable self molding sealant used for stuffing boxes and for all types of valves, pumps and mechanical equipment.
CheckSeal™ 3B

Non-Curing Sealant

Check Seal™ 3B semi-pliable rubber at temperatures up to 700˚F, and is effective as a primary or secondary sealant. It has been successfully used as a secondary micro-void sealant after initial sealant becomes cracked and worm holed.
CheckSeal™ 42

Fast Curing Epoxy Putty

Check Seal™ 42 is a hand-mixable, fast curing, epoxy putty that can be ready for use in just one minute. One hour after mixing, Check Seal™ 42 can be drilled, sawed, sanded, filed, tapped, machined or painted. Packaged in a “no mess” 4 oz. “tootsie-roll” application, the curing agent is encapsulated in the contrasting resin, eliminating drips and runs and requiring no tools. It provides fast repairs to many surfaces including metals, wood, glass, concrete, ceramics and numerous plastics. Approved for NSF 61 applications.