ThredOn® Enviro-1

Yellow Rated Thread Compound

ThredOn® Enviro-1 is a technologically advanced, extremely water resistant, biodegradable base grease formulated with natural mineral fillers and other environmentally friendly additives. It contains no metals or PTFE. It can adhere to wet joints over a wide temperature range and protects threads for superior makeup and breakout performance. It has the added convenience of being light in color to assure consistent coverage.

Recommended Uses

Enviro-1 is used for tool joints, tubing and casing, as well as legs of jack-up rigs. It can be used for storage and thread protection, slides and any highly loaded, slow moving surface.

Enviro-1 meets requirements for the most sensitive marine environments, including Norway Yellow Y1, Cefas E, and VGP EAL for US waters (US EPA).

Typical Characteristics

TitleValue
AppearanceBeige, smooth, tacky
NLGI0-1
Worked Penetration, 60x (ASTM D217) 360-390
Base OilSynthetic ester
Base Oil Viscosity44 cSt at 40°C
Base Oil Viscosity9 cSt at 100°C
Base Oil Pour Point -58°F (-50°C)
Solids ContentMineral fillers
Specific Gravity1.3
Density (lb/gal)10.7
Dropping Point (ASTM D566)>392°F (200°C)
Flash Point>570°F (300°C)
Temperature Range-40°F to 300°F (-40°C to 150°C)
Four-Ball EP Weld Point (ASTM D2596)620 kgf
Friction Factor (API 7A1) 1.0
Evaporation, % Vol Fraction Loss, 24th, 100°C0.40%
Gas Evolution, 120h, 66°C1 cm3
Oil Separation, % Vol Fraction Loss, 24h, 100°C2.10%
Water Leaching, % Mass Fraction Loss, 2h, 66°C1.64
Cold Application at -7°CPass
Adherence at 66°C, % Mass Fraction Loss0%
Copper Strip Corrosion (ASTM D4048)1a
Rust Prevention, SKF Emcore Distilled Water (ISO 11007)Pass (0-0)
Rust Prevention, SKF Salt Water (ISO 11007)Pass (0-0)
Pumpability at -30°C (Lincoln-Helios)Pass
Offshore Environmental ClassificationsNorway Yellow Y1, Cefas ranked E (reg. no. 25214), US EPA VGP 2013 EAL

Packaging Information

Item NumberUnit SizeQuantity
0378044WPS 44 lb pail
0378484DR484 lb drum