Valve Lubrication/ Maintenance

A quality valve lubrication and maintenance program is critical to the life, integrity and reliability of the valves on fracking manifolds, wellheads, Xmas trees, pipelines and compression stations. SOCO is the world leader in valve lubricants, sealants and packing used to maintain these valves and trusted by the most recognized manufacturers in this field.

Valve Lubrication/ Maintenance 1

Products

Chemola™ Desco 1055

Premium Synthetic Valve Lubricant

Chemola™ Desco 1055 is a state-of-the-art synthetic lubricant that is exceedingly resistant to hydrocarbons, water and hydrochloric acid. Chemola™ Desco 1055 is formulated with solid lubricants to provide lubrication to 600˚F.
Chemola™ Desco 600

Synthetic Valve Lubricant

Chemola™ Desco 600 is a superior lubricant formulated for resistance to hydrocarbons. It contains 100% synthetic fluids with a non-soap thickener. Chemola™ Desco 600 is our most popular lubricant for non-sour services and is formulated for resistance to hydrocarbons, water and synthetic fluids.
Chemola™ Desco 625 PAK

Injectable Packing with PTFE and Aramid Fibers

Chemola™ Desco 625 PAK is our most popular blend of 100% synthetic base oils with synthetic fibers and fillers that provide a sure seal. The base fluids provide a very low coefficient of expansion (from -80˚F to 500˚F) while being oil resistant. The solid synthetic fibers and fillers provide a sure seal and are inert to most services.
Chemola™ Desco TFE-Seal 110X

For Hard to Seal Valves

Chemola™ Desco TFE-Seal 110X is a premium sealant for worn, damaged and leaking valves. TFE-Seal 110X is formulated with 100% synthetic base fluid for excellent resistance to washout from hydrocarbons. It contains chemically inert PTFE for ultimate sealing capability. Higher PTFE grades are available.
Chemola™ Desco Valve Cut

Frees Corroded and Frozen Valves

Chemola™ Desco Valve Cut is a formulated multi-ingredient, semi-fluid combination of penetrants and lubricants designed to dissolve and cut residual gums, laquer deposits, inert solids and corrosion deposits that make valves non-functioning and hard to operate.

Although not all valves are recoverable with Valve Cut, with periodic use many operators have found that valves remain operable through years of usage under severe conditions with.