Valve Lubricants & Sealants
Your valuable oil (or gas) pipeline requires the highest quality valve sealants and lubricants available, anywhere. South Coast Products (SOCO) is proud to be the standout choice as an industrial valve sealants distributor in the world. Our customers with large-scale operations in the Middle East demand products that perform exceedingly well in severe conditions.
We test our products to stringent standards at our state-of-the-art facility in Houston, Texas. That’s why our oil, gas and petrochemical customers rely on us to keep their operations running smoothly and with zero unwanted downtime.
Showing 1–18 of 28 results
-
Chemola™ Desco TFE-Seal 110X
For Hard to Seal Valves
Chemola™ Desco TFE-Seal 110X is a premium sealant for worn, damaged and leaking valves. TFE-Seal 110X is formulated with 100% synthetic base fluid for excellent resistance to washout from hydrocarbons. It contains chemically inert PTFE for ultimate sealing capability. Higher PTFE grades are available.
-
Chemola™ Desco Frac-Seal
Water Resistant EP Grease
Chemola™ Desco Frac-Seal is an enhanced-lubricity calcium sulfonate grease with excellent water resistance, pumpability and metal adhesion. It is very stable, resistant to oxidation and high temperatures. Among other applications, it is formulated for use where exposure to harsh elements is a major consideration.
-
Chemola™ Desco CP750 SAGD
Steam-Resistant Lubricant/Sealant
Chemola™ Desco CP750 SAGD is a premium, water insoluble synthetic valve lubricant formulated for extreme high temperature environments such as SAGD, steam injection and geothermal applications. Extensive laboratory and field testing confirms that Chemola Desco CP750 SAGD withstands the temperatures and conditions of steam-assisted gravity drainage, allowing valves to maintain a positive seal during operations. Withstands the maximum pressure rating of the valve.
-
Chemola™ Desco Valve Flush NSR
For Corroded and Frozen Valves
Chemola™ Desco Valve Flush NSR is a butyl flush formulated to free up and clean difficult-to-operate lubricated valves. Cuts residual gums, lacquer deposits, inert solids and corrosion deposits that make valves hard or impossible to operate.
-
Chemola™ Desco TFE-Seal 108
For Hard to Seal Valves
Chemola™ Desco TFE-Seal 108 is the ultimate sealant for damaged valves. It was developed and tested by a group of valve repair specialists with over 20 years combined experience. This is the ultimate sealant of internally worn or damaged valves. It contains a 100% synthetic base fluid for excellent resistance to washout from hydrocarbons. If TFE-Seal 108 won’t seal your valve, it will need to be taken offline or rebuilt.
-
Chemola™ Desco TFE-Seal 104
Hydrocarbon Service (Contains PTFE) Sealant
Chemola™ Desco TFE-Seal 104 is a synthetic lubricant/sealant formulated for general hydrocarbon service. It contains fine PTFE flakes suspended in a hydrocarbon resistant base. TFE-Seal 104 is used for sealing valves with moderate seal wear, and is also suitable for use on threads, gaskets, stuffing boxes and valve stems.
-
Chemola™ Desco Ram Lube
Blowout Preventer Lubricant
Chemola™ Desco Ram Lube was designed as a lubricant for use on the rims and seals of BOP units. It is non-toxic and environmentally safe.
-
Chemola™ Desco Polymel 422
Enhanced Hydrocarbon Service
Chemola™ Desco Polymel 422 now has enhanced hydrocarbon resistance with a specially formulated polymeric lubricant base and unique combination of solid additives. Polymel 422 offers superior metal adhesion under the most demanding conditions, temperatures and pressures. This new formulation has advanced corrosion inhibitors for increased resistance to oxidation. Because it is resistant to acids and alkalis it will not wash out during pipeline maintenance. Polymel 422 can be used as a coating on metal surfaces to protect from acidic environments.
Chemola™ Desco Polymel 422, with its wide temperature range, superior adhesion and chemical resistance covers the widest range of applications. It performs excellently with gate, plug and ball valves throughout oil and gas production operations, pipelines and petrochemical plants.
-
Chemola™ Desco Polymel 410
Catalytic Alkylation Service
Chemola™ Desco Polymel 410 is an improved formulation for hydrocarbon resistance. It is formulated with a polymeric lubricant base to enhance high and low temperature performance and hydrocarbon resistance along with resistance to strong acids and bases. Performance is improved in the fringe temperature applications.
-
Chemola™ Desco 1055
Premium Synthetic Valve Lubricant
Chemola™ Desco 1055 is a state-of-the-art synthetic lubricant that is exceedingly resistant to hydrocarbons, water and hydrochloric acid. Chemola™ Desco 1055 is formulated with solid lubricants to provide lubrication to 600˚F.
-
Chemola™ Desco 990-GT
Geothermal Lubricant
Chemola™ Desco 990-GT is a water insoluble synthetic valve lubricant and anti-seize for use in extreme high temperature environments such as geothermal applications. It is highly resistant to water and aqueous solutions (alkalis, acids). The solid lubricant additives contained in Chemola™ Desco 990-GT allow a greater degree of lubrication at temperatures where most lubricants fail.
-
Chemola™ Desco 960
Body Fill
Chemola™ Desco 960 is formulated for valves that contain body cavities. It is an economical body fill that will displace water and other containments. Chemola™ Desco 960 has high metal adhesion to lubricate and seal gates as they enter the body cavity.
-
Chemola™ Desco 955
Premium Synthetic
Chemola™ Desco 955 is a hydrocarbon-resistant synthetic lubricant containing molybdenum disulfide for added extreme pressure properties. Chemola™ Desco 955 is formulated with solid lubricants to provide lubrication to 600˚F.
-
Chemola™ Desco 800
Aromatic Hydrocarbon Service
Chemola™ Desco 800 is a high purity synthetic lubricant formulated for enhanced resistance to aromatic hydrocarbons and gasoline. Its blend of heavy bodied synthetic oils promotes superior metal adhesion and resistance to hydrocarbon blends that have a high percentage of aromatic compounds.
-
Chemola™ Desco 750
High Temperature Hydrocarbon Service
Chemola™ Desco 750 is formulated with 100% synthetic oils and contains solid lubricants for effective lubrication at temperatures to 900˚F.
-
Chemola™ Desco 660
Hydrocarbon Service for McEvoy Type Valves
Chemola™ Desco 660 is a superior gate valve lubricant/sealant formulated with 100% synthetic oils and non-soap thickeners. It is very effective in gas service (except chlorine, bromine, fluorine, and oxygen) and highly resistant to washout. It has excellent metal adhesion, corrosion resistance, EP characteristics and is water resistant.
-
Chemola™ Desco 622
Low Temperature Hydrocarbon Service
Chemola™ Desco 622 greatly expands the effective temperature range of synthetic valve lubricants while providing improved fuel and oil resistance. It is formulated with a 100% synthetic base oil blend reinforced with a state-of-the-art additive package to provide superior sealing, lubricating and resistance properties.
-
Chemola™ Desco 620
Sealant/Lubricant for WKM Type Valves
Chemola™ Desco 620 is a “peanut butter” type of synthetic lubricant/sealant used in gate valves with liquid and gas hydrocarbon service. It has a 100% synthetic fluid base and is also available in a softer version referred to as “creamy.”
When You Demand the Best Valve Lubricant Products
We know our customers take their production goals seriously. In achieving those goals, they partner with SOCO for three important reasons:
- We distribute the most reliable valve sealant products.
- We provide exceptionally knowledgeable customer service.
- We provide the fastest delivery.
Pipeline equipment (including valves) is costly and must be protected with superior lubricants and sealants appropriate to highly specific situations. That’s why our discerning customers order the following products from us:
- Chemola™ Desco TFE-Seal 104
- Chemola™ Desco TFE-Seal 108
- Chemola™ Desco TFE-Seal 110X (premium sealant for worn or leaking valves)
- Chemola™ Desco TFE-Seal 115 (semi-synthetic for gate and ball valves)
- Chemola™ Desco TFE-Seal 115X Arctic (seal valves at extreme temperatures)
SOCO has the premium quality materials you can rely on for whatever punishing climate your pipeline and other operations are located in.
World-Class Customer Service in Valve Equipment
SOCO is the only valve lubricants distributor you’ll ever need. Whether you’re in oil, gas, transportation, refining or petrochemical, you’ve heard about us and our dedication to quality. Experience friendly customer service that will answer all of your technical questions. You’ll benefit from the fastest delivery on the planet. After all, we know that when our customers require valve equipment, there’s a good chance they need it immediately!
At SOCO, we’re continually researching new ways to increase operational efficiency. We’re tireless in creating products that thrive in harsh environments and are as eco-friendly as possible. That’s why we built an ultra-modern, massive facility in Houston, Texas. Everything we do is for the benefit of our customers. So, if you have highly technical questions for the purpose of differentiating our large product line, we’re here for you 24/7.
Remember, we’re not just the most respected valve lubricant and sealant distributor! We also ship:
- Packing products
- Industrial cleaners
- Industrial greases
- Thread compounds
- Lubrication fittings
- Drilling compounds
- Injectable packing
- Composite wraps
- And more…
We’re happy to serve all your commercial and industrial needs!
Contact SOCO: Exceptional Valve Sealant Distributors
We’re here for all your important technical and delivery questions. Email us at: custserv@socousa.com.
Or use the following phone numbers to reach us at any time:
Local customers: (713) 225-0048.
Toll-free number: (800) 535-5823.
We look forward to doing business with you and achieving optimal operational efficiency together!