Chemola™ Desco

Chemola™ Desco is one of the largest and oldest producers of valve lubricants, sealants and packing. The line also offers a variety of greases for a wide range of industrial applications.

Chemola™ Desco 111 (LT)

Low Temp Hydrogen Sulfide Service

Chemola™ Desco 111 (LT) is designed for use in valves under arctic conditions (to -75°F). 111-LT is extremely resistant to hydrogen sulfide and will not mix with water, preventing freeze-up in the valve. It provides metal protection and lubrication and is water resistant.

Recommended Uses
Chemola™ Desco 111-LT can be used in the presence of diesel fuel, gas and well condensate, hydrogen sulfide, sour crude and standard crude.

Recommended Clean Up Solvents

  • Isopropyl Alcohol
  • Ethyl Alcohol
  • Methyl Alcohol
  • Chlorinated Solvents
  • Active Solvents (Esters, Ketones, etc.)

Typical Characteristics

Appearance Black, smooth
NLGI 1
Penetration (ASTM D217) 320-330
Worked Penetration, 60x (ASTM D217) 330-350
Base Oil Synthetic hydrocarbon
Base Oil Viscosity 30 cSt at 40°C
Base Oil Pour Point -80 °F (-62 °C)
Thickener Inorganic
Additives H2S/Corrosion Inhibitor
Solids Content Graphite
Specific Gravity 0.8
Density (lb/gal) 6.9
Dropping Point (ASTM D566) >500°F (260°C)
Flash Point >470°F (243°C)
Temperature Range -75°F to 350°F (-57°C to 177°C)
Four-Ball Wear (ASTM D2266) 0.7mm
Four-Ball EP Weld Point (ASTM D2596) 160 kgf

 

Packaging Information

Item Number Unit Size   Quantity
0825010CR 14 oz cartridge 10 per carton
0825010QB 10 lb can  
0825020WMS 20 lb pail  
0825035WMS 35 lb pail  
0825120KG 120 lb keg  
0825400DR 400 lb drum  

 

 

Para la traducción en español, 
haga clic en el enlace de más abajo.
Do Not Use On Oxygen Services.

Special packaging sizing available upon request.

More Valve Lubricants and Sealants